Ship Pivot Point Simulator
Rigid-body kinematics · pivot point, turn radius and predicted manoeuvre · v1.16 · real chart overlay · free map panning · vessel placed by mouse · switchable layers · zoomable plan · online and offline
Chart (real map · Web Mercator · vessel to true scale)
Enter an approximate lat / lon of the starting point. Wheel — zoom · drag — move the map freely · Vessel switch (or Shift+drag) — move the vessel: its new position is written into the latitude/longitude fields and into the link, so it stays exactly where you put it. N / S / E / W nudge the vessel’s start position by 50 m without moving the view. The chart is north-up, the vessel keeps its true size, course and track. Use Cache this view to download the tiles of the present view, then switch Offline on: the chart is then drawn from the disk cache only, with no network at all.
Map data © OpenStreetMap contributors · seamarks and harbour marks © OpenSeaMap
Manoeuvre plan (true scale, metres)
Manoeuvre schedule (change of bow / stern / longitudinal velocity at a given time)
| time, min : s | bow, kn | stern, kn | long., kn | yaw rate |
|---|
Readout
Kinematic scheme (schematic, not to scale)
The dashed line joins the tips of the transverse velocity vectors; its intersection with the centreline is the pivot point (PP) — the station with zero transverse velocity. The scheme shows the condition of the schedule entry selected below.
Model
Model. Rigid-body kinematics in the horizontal plane. With bow transverse velocity vbow, stern
vstern, length L and LCG at λL: yaw rate ω = (vbow − vstern)/L
(shown in °/min), sway at CG = vstern + λ(vbow − vstern), speed of CG
V = √(u² + vCG²) and turn radius R = V/|ω|.
The pivot point is the station of zero transverse velocity, PP = L·vbow/(vbow − vstern) from the bow.
Prediction. While the velocities are held constant in the body frame, the manoeuvre is an exact circular arc:
ψ(t) = ωt, X(t) = (u/ω)(sin ψ − sin ψ₀) + (vCG/ω)(cos ψ − cos ψ₀),
Y(t) = (u/ω)(cos ψ₀ − cos ψ) + (vCG/ω)(sin ψ − sin ψ₀).
The turning circle centre is C = P₀ + (1/ω)·R(ψ₀)·(−vCG, u).
Scope. Positive transverse velocity is to port, longitudinal velocity u does not move the PP.
This is a kinematic model, not a hydrodynamic one: the inputs are already the result of the forces, not the forces themselves.
If the bow and stern transverse velocities are equal there is no yaw and no finite PP can be determined.
Ghost ships. The ghost ships are the positions of the vessel one minute, two minutes … up to the prediction horizon.
The yaw rate is given in degrees per minute.
Plan view. The plan can be shown as a full plan (turning circles, turn centres, pivot points, marks of the scheduled changes)
or as a clean manoeuvre, where only the track, the vessel every minute and the velocities are left. Every element of the plan can also be
switched on and off separately under Layers in the control panel: turning circles, pivot points, pivot points on the ghost ships,
velocity vectors and marks of the scheduled changes. The velocities may be drawn on the
ghost ships as well: the transverse velocity of the bow (green), of the stern (blue) and the longitudinal velocity of the centre of
gravity (white); after a scheduled change the set of velocities changes accordingly. The length of the arrows is common to the whole plan.
Schedule. The manoeuvre may contain changes of the velocity set at any moment: click on the time line or press
“+ Add change”, then set bow / stern / longitudinal velocity for that entry. Every change opens a new segment — position and
heading stay continuous, so the track is a chain of exact circular arcs and the pivot point jumps to its new station.
The moment of a change is entered as minutes : seconds (two separate boxes) and is shown in both units, so no manual
conversion is needed; the time line and the plan use the same m:ss notation.
Editing resolution is 1 s; changes spaced 5–30 s apart are the physically meaningful range (that is how fast a tug or a thruster
actually builds up its pull). Faster changes would need an inertia model, which this tool deliberately does not have.